08/14/25 Endur Energy Integration Status

08/14/25 Endur Energy Integration Status

    Endur Energy: Status Change
    • EndurEnergy has been reclassified from "Certified" to "Proven" effective August 14th, 2025.
     Here is what that means, and what it does NOT mean:
    • Do NOT tell customers Endur is no longer a partner. That is false. They will remain in the integration guide under "Proven" (WIP), just like LinioTech and PowerSynce (residential guide). 
    • Continue supporting project resolution and inverter-related issues.
    • Battery-specific issues should be redirected and escalated to Endur via Ricardo Nava via email at ricardo.nava@endurenergy.com

    This change does not alter how we interact with sites using Endur products.
    If you are uncertain or unclear about what this status change entails, reach out to and escalate to a L2 or support supervisor

      • Related Articles

      • EndurEnergy ESP-5100

        Notes Ensure correct battery interconnection and connect to the inverter as specified in EndurEnergy’s user manual. Custom Cable Connect all EndurEnergy ESP-5100 batteries together with the provided RJ45 cable using “M/S” ports. (Can use up to 8 ...

      • Briggs and Stratton SimpliPhi 6.6

        Project Documentation Take a photograph of the battery stack(s) BASCO Integration Guide Product Manual: www.bascodigital.com/assets/share/asset/a9krpstcso A maximum of 6 stacks can be connected in a single system. Per NFPA 855, a maximum of 40kWh in ...

      • Powersync

        Communications Installation and Setup Instructions 877-459-4591 support@powersyncenergy.com Manual Link: netorgft3957589.sharepoint.com/Shared Documents/Forms/AllItems.aspx?id=%2FShared Documents%2FLFP - Low Voltage Module%2FManuals%2FLFP-LV Module – ...

      • Briggs and Stratton - Simpliphi 6.6

        BASCO Integration Guide Product Manual: www.bascodigital.com/assets/share/asset/a9krpstcso A maximum of 6 stacks can be connected in a single system. Per NFPA 855, a maximum of 40kWh in utility spaces or basements and 80kWh in garages our outdoor ...

      • Discover

        Notes You will need the Discover Lynk device to adapt the battery’s AEBus to CAN Bus for use with the Sol-Ark. The Lynk will need the proper adapter for the Sol-Ark’s pin configuration (Part number 950-0016-SLRK). Communications with this battery ...