Residential Basic Programming Guide

• Related Articles

• 15K.12 Commissioning Workflow

  Inverter Dipswitch Positions Inside the inverter is a dip switch. For single inverter installs, no adjustment is needed. Both switches should be down in the OFF position. For two inverters, put both dipswitches up to enable the on position. This sets ...

• 15k.21 Generators

  Wiring to the GEN or GRID port There are two ways to interconnect a generator to a Sol-Ark: via the GRID or GEN port. The GEN port is the easiest place to land generators onto a Sol-Ark system. Wiring to the GEN port avoids the need for an automatic ...

• 15K.11 Installation Workflow

  Inspect Shipment Upon delivery of materials, photograph the inverter box, showing any damage or list any missing components. If damage or missing parts, immediately call +1 (972) 575-8875. Other Useful Site Photographs Transmitter Dongle Serial ...

• 15K.10 Design References

  Shared Battery / Grid / Gen / ports The battery, grid, gen ports must all be used for a common purpose and be combined together specific to their single function. Shared Battery Bank ALL parallel inverters MUST connect to a single battery bank. The ...

• Briggs and Stratton - Simpliphi 6.6

  BASCO Integration Guide Product Manual: www.bascodigital.com/assets/share/asset/a9krpstcso A maximum of 6 stacks can be connected in a single system. Per NFPA 855, a maximum of 40kWh in utility spaces or basements and 80kWh in garages our outdoor ...